Presentation + Paper
21 August 2020 Modeling light-controlled actuation of flexible magnetic composite structures using the finite element method (FEM)
Author Affiliations +
Abstract
Photoactive materials hold great promise for a variety of applications. We present a finite element model of light-controlled flexible magnetic composite structure composed of 33.3% Chromium dioxide (CrO2) and 66.7% Polydimethylsiloxane (PDMS) by weight. The structure has a dimension of 8 mm × 2 mm × 100 μm and has been previously experimentally studied. Due to the low Curie temperature, the structure acts as an actuator, shows significant deflection under the external magnetic field and relaxation due to laser heating. Thermal and magnetic deflection analysis has been performed using the FEM model. The simulation results show a maximum structural deflection of 6.08 mm (76% of the length of the structure) when subjected to 30 mT magnetic flux density and 160 mW laser power at 303 K (room temperature). We will present the results of the simulation model and comparison to experimental data reproducing the previously observed motion of the (CrO2+PDMS). This model will enable future fracture and fatigue analysis as well as extension to new photoactive geometries.
Conference Presentation
© (2020) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Amit Kumar Jha, Meng Li, Ewan S. Douglas, Erin R. Maier, Fiorenzo G. Omenetto, and Corey Fucetola "Modeling light-controlled actuation of flexible magnetic composite structures using the finite element method (FEM)", Proc. SPIE 11477, Molecular and Nano Machines III, 1147704 (21 August 2020); https://doi.org/10.1117/12.2568919
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Composites

Magnetism

Finite element methods

Data modeling

Optical simulations

Polymers

Actuators

Back to Top