Active gain fiber is a critical component to realize fiber laser sources for various applications such as cutting, welding and other material processing. To meet the requirement for various laser applications, the power scaling of fiber lasers is still concern, where active gain fiber is very important. There are several fabrication technologies for active fibers with low NA, large core diameter and high absorption, which characteristics for high power lasers are typically required. Here, novel fabrication technology based on VAD (Vapor Axial Deposition) for active fibers is introduced.
VAD technology for laser fibers are offering the extremely large rare-earth doped core, which makes it possible to improve the productivity and reproducibility of laser fibers. At the previous report, Yb:Ce co-doped fibers have shown relatively large background loss and the issues of surface crystallization. In this report, the additional process development for the reduction of the loss and the efficiency improvement has been successful. Based in that, Yb:Ce codoped aluminosilicate PM fiber has been fabricated and it used for power amplification of narrow linewidth source. The slope efficiency was 72.8% w.r.t the absorbed pump power and the output power has been reached to 124W at the initial experiment. The further power scaling will be performed and SBS characterization will be reviewed.
In this study, Cylindrical Diffusing Optical Fiber Probe (CDOFP) is used for tumor treatment using Photolon-based photodynamic therapy induced apoptosis and necrosis in thyroid papillary carcinoma (BCPAP) cells. In conclusion, owing to multiple advantageous properties of Photolon as a PDT agent, including preferential accumulation in tumor, biodegradability and unprecedented photosensitizer packing, we evaluate Photolon mediated PDT as a minimally invasive, tumor specific treatment for thyroid cancer. the Photolon-PDT inhibited the growth of human papilloma thyroid cancer cells and effectively decreased xenograft tumor progression in both 10mm and 15mm diffusing length probe. Therefore, this study preliminarily suggests the use of CDOFP and Photolon-PDT for more effective treatment of human thyroid cancer.
VAD technology has been proposed for laser fiber fabrication to improve its productivity and reproducibility. Rare-earth ion, Yb3+ has been incorporated with Ce3+ and Al3+ by the conventional solution doping process. In order to obtain a transparent Yb-doped core rod, the pre-sintering and consolidation process for the large volume of silica soot deposited by VAD has been significantly investigated. In addition, 20/400μm Yb-doped fiber with octagonal cladding has been fabricated. The cladding absorption was 0.44dB/m at 915nm, which corresponds to ~ 0.2mol% of Yb concentration and the slope efficiency with respect to absorbed pump power at 976nm was 66.7%.
In this study, cylindrical diffusing optical fiber probe (CDOFP) used for tumor treatment using PDT method is developed and analyzed. Diffusing beam profile of 5mm to 40mm tip length probe is produced and analyzed using laser scribing equipment developed in a previous research. Ball tip at the tip of CDOFP was developed for easier infiltration of tissues and the beam profile of such tip is reviewed. Additionally, CDOFP for PDT tumor treatment was used for laser coagulation test on animal tissue. CDOFP with diffusing tip length 5mm and 15mm was infiltrated inside a cow's liver tissue to process laser coagulation test. Coagulation and thermal damage was measured with twice the maximum intensity of laser, where maximum intensity in-vivo test is 1W 200J.
We have proposed the systematic measurement of coating geometry for specialty fibers based on dark field illumination technique. The measured dark-field projection image shows clear interfaces between different refractive index materials. Using own developed image processing tool, the interfaces automatically detected and analyzed. Every degree of measurements provides circularity of each layer and then shows the center point of individual layer. Using this technique, coating diameter, coating non-circularity and coating ellipticity for double clad fiber were successfully measured and high resolution camera also detected some of existing coating defect and delamination.
The treatment using photodynamic therapy (PDT) among cancer treatment methods shows remedial value in various cancers. The optical fiber probe infiltrates into affected parts of the tissues that are difficult to access, such as pancreatic cancer, carcinoma of extrahepatic bile duct, prostate cancer, and bladder cancer by using endoscopic retrograde cholangiopancreatography (ERCP) and endoscopic ultrasonography (EUS) with various types of diffusing tips.
In this study, we developed cylindrical diffusing optical fiber probe (CDOFP) for PDT, manufactured ball-shaped end which is easily infiltrated into tissues with diffusing length ranging from 10mm to 40mm through precision laser processing, and conducted beam profile characterization of manufactured CDOFP. Also, chemical reaction between photo-sensitizer and laser in PDT is important, and hence the thermal effect in tissues as per diffusing length of probe was also studied as it was used in a recent study.
Although the patients with cancer on pancreas or pancreaticobiliary duct have been increased, it is very difficult to detect and to treat the pancreatic cancer because of its low accessibility and obtuseness. The pancreatic cancer has been diagnosed using ultrasonography, blood test, CT, endoscopic retrograde cholangiopancreatography (ERCP), endoscopic ultrasonography (EUS) and etc. Normally, light can be delivered to the target by optical fibers through the ERCP or EUS. Diffusing optical fibers have been developed with various methods. However, many of them have mechanical and biological problems in the use of small-bend-radius apparatus or in tissue area. This study developed a therapeutic cylindrical diffusing optical fiber probe (CDOFP) for ERCP and EUS which has moderate flexibility and solidity to treat the cancer on pancreaticobiliary duct or pancreas. The CDOFP consists of a biocompatible Teflon tube and multimode glass fiber which has diffusing area processed with laser and high refractive index resin. The CDOFP was characterized to investigate the clinical feasibility and other applications of light therapy using diffusing optical fiber. The results presented that the CDOFP may be used in clinic by combining with endoscopic method, such as ERCP or EUS, to treat cancer on pancreas and pancreaticobiliary duct.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.