When a substrate-bonded silicone dielectric elastomer (DE) is subjected to high voltage, creasing, wrinkling, and cratering instabilities can be formed at the surface of the DE. This deformation, has been already demonstrated for the prevention and detachment of biofouling from the surface of DEs. In this work we add sensing capabilities to the anti-biofouling effect of active DE surfaces. The capacitance of the sensor is measured as a function of applied voltage, and the threshold voltage at which instabilities occur is identified. The formation of instabilities increases the capacitance of the device. When stiff biofouling material attach to the surface of the silicone, the threshold voltage necessary to develop instabilities on the surface of the silicone will increase and this can be used as a measure of attached species to the surface.
Biofouling accumulation on synthetic underwater surfaces presents serious economic problem for the marine industry. When a substrate-bonded dielectric elastomer (DE) is subjected to high voltage, deformations in form of creases can be formed at the surface of the DE. This deformation, has been already demonstrated for the prevention and detachment of biofouling from the surface of DEs. In this work, we add sensing capability to the anti-biofouling effect of active DE surfaces. A device consisting of a metallic plate, a Kapton sheet, and a thin silicone membrane is immersed in conductive solution, which acts as one electrode, with the metal plate being the second electrode. Two different conductive solutions were used 3.5 wt% NaCl and 20 wt% NaCl. The surface deformation of the silicone as a function of applied voltage is monitored under microscope in order to verify electrical measurements. Breakdown measurements of the dielectric material in different conductive solutions are also performed. Because the membrane is made from incompressible elastomer and bonded to a rigid substrate, voltages below the creasing threshold create no deformation in the membrane, and therefore no change in capacitance. Above the voltage threshold, creasing instabilities appear at the surface of the silicone, thus increasing the capacitance of the device. Therefore, the capacitance of the sensor is measured as a function of applied voltage, and the voltage at which the capacitance increases is the threshold voltage at which creases occur. Creases are identified when using both 3.5 wt% NaCl and 20 wt% NaCl as top electrode. Theoretical values of creasing voltage deviate from the experimental measurements. Type of conductive solution is shown to have no significant influence on a breakdown voltage.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.