KEYWORDS: Filtering (signal processing), Particles, Electronic filtering, Signal processing, Optical filters, Optical tweezers, Systems modeling, Motion models, Interference (communication), Signal to noise ratio
The cooling and quantum control of the optically trapped particles is a hot topic in quantum frontier research. One of the key steps is using Kalman filter to extract the particle’s motion from noisy signals. Time delays of the Kalman filters are found in the process of signal extraction. Here the particle displacements based on the parameters of actual optical trapping systems are simulated, and the time delays of the Kalman filtering process are observed by changing the oscillation periods and the relaxation time for stabilization. The results indicate that Kalman filtering can effectively compress the noises in the displacement signal and thus improve the signal-to-noise ratio. Furthermore, as smaller the signal frequency is, larger time delays are observed in the process. It shows that the time delays should be noticed and compensated. Meanwhile, it is shown that the consuming time for signal stabilizations in the filtering process and the phase of the original signal, neither of which affects the filtering effect. These simulation results are our initial explorations for the cooling of optically trapped particles in vacuum. It would provide possible help to deal with the delay mismatch resulted from Kalman filtering and for the cooling of the optically trapped particles.
Optical tweezers (OTs) are an important tool for the viscosity measurements in microrheology, and passive techniques have the features of being simple and need no external force generations. Current passive methods using OT always first calibrate the potential stiffness and then do parameter fittings to obtain the viscosity. Here, we introduced and demonstrated a passive viscosity estimation method for low-viscous microfluids using OTs without stiffness calibration and parameter fitting. By Brownian trajectory tracking of single trapped bead, the viscosity coefficients of water and NaCl solutions are quickly obtained with small deviations (typical <10 % ) from the reference values. Besides, we introduce estimations for the commonly used voltage-to-displacement conversion factor, and the consistency check between the estimations and calibrations is used to represent the estimation quality. The whole process is very convenient for automatic processing. Further matrix operations are proposed and tested, which are expected to be integrated with holographic OTs and optical fiber traps for distributed multidimensional measurement.
We present a precise passive frequency difference stabilization scheme for the Y-shaped cavity dual-frequency laser. A two-stage thermostat and a precision steady current circuit were designed to stabilize the temperature and discharge current of the laser. The laser relative frequency difference drift rate is stabilized within 0.011% at room temperature. The result shows an improvement of two orders of magnitude over the stress-induced birefringence closed-loop control method. This scheme will further improve the accuracy of acceleration and precision force measurement. Moreover, the scheme shows the great potential in industrial applications because of the low cost and good environmental adaptability. In addition to the temperature change, we found that the mode repulsion also affects the stability of the frequency difference.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.