Paper
22 March 2011 Mask enhancer technology with source mask optimization (SMO) for 2Xnm-node logic layout gate fabrication
Author Affiliations +
Abstract
Strong resolution enhancement technologies (RETs) combined with hyper-NA ArF immersion lithography with source and mask optimization (SMO) have become necessary to achieve sufficient resolution in 2Xnm node devices. Conventional SMO methods have focused on minimizing the edge placement error and/or the cost functions of dose, focus, and mask errors. This has not, however, resolved the conflict between line and gap patterns on logic gate layouts. One issue remaining in particular is the mask error enhancement factor (MEEF). Furthermore, the pattern shapes at the line end gaps of SRAM gates remain a major challenge for logic device manufacturers. To overcome these problems, we explain the importance of controlling the light intensity profiles at line end gaps, focusing on a Panasonic product called "Mask Enhancer" that comprises an attenuated mask with a phase shifting aperture and enables light intensity profiles to be controlled easily. We demonstrate the product's effectiveness in printing gates with optimized illumination source shapes. A simulation experiment and a feasibility study confirmed that Mask Enhancer can improve the MEEF and pattern shapes at the line ends of SRAM gates.
© (2011) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Takashi Matsuda, Shigeo Irie, Tadami Shimizu, Takashi Yuito, Yasuko Tabata, Yuuji Nonami, Akio Misaka, Taichi Koizumi, and Masaru Sasago "Mask enhancer technology with source mask optimization (SMO) for 2Xnm-node logic layout gate fabrication", Proc. SPIE 7973, Optical Microlithography XXIV, 797316 (22 March 2011); https://doi.org/10.1117/12.878727
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Photomasks

Source mask optimization

Binary data

Halftones

Lithographic illumination

Logic devices

Phase shifts

RELATED CONTENT

Layer aware source mask target optimization
Proceedings of SPIE (March 15 2016)
Forbidden pitches for 130-nm lithography and below
Proceedings of SPIE (July 05 2000)
Subwavelength optical lithography
Proceedings of SPIE (August 18 2000)
Alternatives to alternating phase-shift masks for 65 nm
Proceedings of SPIE (December 27 2002)

Back to Top