Paper
29 March 2013 Double patterning with dual hard mask for 28nm node devices and below
Hubert Hody, Vasile Paraschiv, Emma Vecchio, Sabrina Locorotondo, Gustaf Winroth, Raja Athimulam, Werner Boullart
Author Affiliations +
Abstract
In this paper, we report a double patterning process resulting in amorphous silicon (a-Si) gate lines with a thickness of 80nm and a lateral critical dimension (CD) below 30nm. We present a full stack for a double patterning approach for etch transfer down to a Si layer, including a hard mask in which the line and cut patterning are performed. The importance of the hard mask (HM) in the success or failure of the exercise is evidenced. Once the suitable HM has been selected, the etch chemistry is shown to have a significant impact on the line width roughness (LWR) of the gate. Ultimately, remarkably low LWR could be achieved on gates exhibiting straight profile. All the results shown in this paper have been obtained on 300mm wafers.
© (2013) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Hubert Hody, Vasile Paraschiv, Emma Vecchio, Sabrina Locorotondo, Gustaf Winroth, Raja Athimulam, and Werner Boullart "Double patterning with dual hard mask for 28nm node devices and below", Proc. SPIE 8685, Advanced Etch Technology for Nanopatterning II, 86850P (29 March 2013); https://doi.org/10.1117/12.2010951
Lens.org Logo
CITATIONS
Cited by 3 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Etching

Double patterning technology

Photomasks

Silicon

Amorphous silicon

Line width roughness

Plasma

Back to Top