KEYWORDS: Sensors, Distortion, Modulation transfer functions, Spatial frequencies, Imaging systems, Optical transfer functions, Point spread functions, Optical engineering, Signal to noise ratio, Prototyping
A novel sensor for use in displacement metrology is proposed. It is based on grating imaging, which conventionally uses two amplitude gratings to generate a sinusoidal image. In the conventional method, the poor signal-to-noise ratio of the displacement output is one of the barriers to precise measurement, because 75% of the illumination light is trapped by the two amplitude gratings. In the proposed sensor a cylindrical lens array and a sine phase grating are used as the first and the second grating, respectively. Therefore, the illumination light is intercepted by neither, so that four times higher displacement signal amplitude than that of the conventional sensor can be expected. Consequently, four times higher signal-to-noise ratio can be obtained. Furthermore, the proposed sensor generates a sinusoidal output with little distortion by using the sine phase grating with optimized conditions, so that accurate measurement can be expected. In our prototype, a cylindrical lens array with a 200-µm period and a reflective sine phase grating with a 100-µm period were used.
KEYWORDS: Sensors, Optical transfer functions, Distortion, Modulation transfer functions, Metrology, Point spread functions, Spatial frequencies, Staring arrays, Signal to noise ratio, Reflectivity
A novel sensor for use in displacement metrology is proposed. The proposed displacement sensor is based on the grating
imaging, which conventionally uses two amplitude gratings with rectangular apertures of fifty percent width of the
period. In the conventional way, signal to noise ratio of displacement output is one of issues to be overcome for precise
measurement because about seventy five percent of the illumination light is trapped by two amplitude gratings. On the
other hand, in the proposed sensor a cylindrical lens array and a phase grating are applied as the first and the second
grating, respectively. Therefore, the illumination light is trapped neither by the first grating nor the second grating except
absorption.
In our experiments, the cylindrical lens array with 200 μm period and the reflective sine phase grating with 100 μm
period are used. Experimental results demonstrate that higher position resolution and higher accuracy of the
displacement measurement is feasible by our proposal.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.